Top Load Washing Machine Won’t Fill With Water – Solution

Your top-load washer won’t fill up. You can watch our video to see if your washer water valves are clogged, a leak in the water line or a kink.

Water is essential for top-load washers to function properly. If it isn’t filling up with water, then you know that something’s wrong. You can easily check for the problem. This video will walk you through the troubleshooting process, and show you step-by-step instructions on how to clear your water inlet screens. Be careful! If you do this wrongly, your home could be inundated.

For information about how to care for your appliance, make sure you consult the owner’s manual.

What Washer Will Not Fill?

1. Make sure the lid is closed completely

2. Check that hot and cold water are available.

3. Check to see if the fill lines are kinked.

4. Verify that the water inlet screens have not become blocked.

First, turn off the water. Next, remove the fill hoses and clean your screens. Do not remove them as this could cause flooding. Turn the water on again, and then reinstall the hoses. Check for leaks.

If your top-load washer is still not filling with water, it’s time for a repair.

Leave a Reply

Your email address will not be published.